010224 RECA UK Catalogue

01 09 - Reproduction, even in part prohibited. Printed in UK Modified: 10 January 2024 01 09 01 09 All dimensions in mm unless otherwise stated. RECA Ultra Inox Drill ¤ DIN388 HSS-CO5% HSS Cobalt drill with Tricon shaft ¤ 135° turbo cutter, helps to centre drill accurately and reduce wander meaning no centre punch required. ¤ TRICON SHAFT, prevents movement of drill within the drill chuck, and enables optimum power transfer to the drill point. (from 4.00mm). ¤ Black and gold heat surface treatment, helps reduce thermal load on the drill, helping to extend the drill life. (from 3.00mm). ¤ This drill is especially suitable for hard materials such as HARDOX® 500, A2 & A4 stainless or titanium with a strength of up to 850n/mm². ¤ Optimal performance on material up to 5mm thick. ¤ RECA Ultra Twist Drill Set ¤ 34 pc set 2.5-13mm ¤ 2 x 1-5mm, 1 x 5.5-13mm Art. No.: 0627 004 913 Art. No. Ø Length Flute Pack Qty 0627 000 020 2.0 49 24 10 0627 000 025 2.5 57 30 10 0627 000 030 3.0 61 33 10 0627 000 032 3.2 65 36 10 0627 000 033 3.3 65 36 10 0627 000 035 3.5 70 39 10 0627 000 040 4.0 75 43 10 0627 000 042 4.2 75 43 5 0627 000 045 4.5 80 47 5 0627 000 050 5.0 86 52 5 0627 000 055 5.5 93 57 5 0627 000 060 6.0 93 57 5 0627 000 065 6.5 101 63 5 0627 000 068 6.8 109 69 5 0627 000 070 7.0 109 69 5 0627 000 075 7.5 109 69 5 0627 000 080 8.0 117 75 1 0627 000 085 8.5 117 75 1 0627 000 090 9.0 125 81 1 0927 000 095 9.5 125 81 1 0627 000 100 10 133 87 1 0627 000 102 10.2 133 87 1 0627 000 105 10.5 133 87 1 0627 000 110 11.0 142 94 1 0627 000 115 11.5 142 94 1 0627 000 120 12.0 151 101 1 0627 000 125 12.5 151 101 1 0627 000 130 13.0 151 101 1 Morse Taper Drill Sleeve To reduce hole size of machine spindle where the drill shank is smaller than the spindle hole. Drift Key Used to help ejection of tapered tools from machine spindles, quickly and easily. Art. No. Outside Inside 3650 548 21 2 1 3650 548 32 3 2 Art. No. Size 3650 562 12 MT1 & 2 3650 562 3 MT3

RkJQdWJsaXNoZXIy MTU4NDg0