01 11 - Reproduction, even in part prohibited. Printed in UK Modified: 04 August 2026 01 11 01 11 All dimensions in mm unless otherwise stated. RECA twist drill bit, ground, with morse taper HSS, DIN 345, type N, right-hand cutting, conical cut, tip angle 118°, point thinning in accordance with DIN 1412, design A Application area: Standard drill bit for drilling steel and cast steel (alloyed and unalloyed), grey cast iron, malleable iron, spheroidal graphite iron, sintered iron, nickel silver and graphite. Advice: Accessories range: Drill chucks, morse taper arbors, reducing sleeves, extension sleeves, ejectors, vices. RECA HSS Morse Taper Twist Drill Bit Art. no. Dia Suitable for morse taper tools Length Chip flute length PU 0628 120 12.0 MK 1 182 101 1 0628 130 13.0 MK 1 182 101 1 0628 140 14.0 MK 1 189 108 1 0628 145 14.5 MK 2 212 114 1 0628 150 15.0 MK 2 212 114 1 0628 160 16.0 MK 2 218 120 1 0628 165 16.5 MK 2 223 125 1 0628 170 17.0 MK 2 223 125 1 0628 180 18.0 MK 2 228 130 1 0628 190 19.0 MK 2 233 135 1 0628 200 20.0 MK 2 238 140 1 0628 210 21.0 MK 2 243 145 1 0628 215 21.5 MK 2 248 150 1 0628 220 22.0 MK 2 248 150 1 0628 230 23.0 MK 2 253 155 1 0628 250 25.0 MK 3 281 160 1 0628 260 26.0 MK 3 286 165 1 0628 280 28.0 MK 3 291 170 1 0628 300 30.0 MK 3 296 175 1 0628 320 32.0 MK 4 334 185 1 0628 350 35.0 MK 4 339 190 1 Morse Taper Drill Sleeve To reduce hole size of machine spindle where the drill shank is smaller than the spindle hole. Drift Key Used to help ejection of tapered tools from machine spindles, quickly and easily. Art. No. Outside Inside 3650 548 21 MT2 MT1 3650 548 32 MT1 MT2 Art. No. Size 3650 562 12 MT1 & MT2 3650 562 3 MT3
RkJQdWJsaXNoZXIy MTU4NDg0